Connecting A Pc; Displaying A Pc Image On The Screen; Selecting The Picture Size - Sharp Aquos LC-32B20E Operation Manual

Connecting a pC

Connecting a pC
HDmi Connection
pC
HDMI cable
pC
DVI/HDMI conversion cable
ø 3.5 mm stereo minijack cable
analogue Connection
pC
ø 3.5 mm stereo minijack cable
RGB/DVI conversion cable
pC
ø 3.5 mm stereo minijack cable
note
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 36 for a list of PC signals compatible with the
TV.
• Macintosh adaptor may be required for use for some
Macintosh computers.
• When connecting to a PC, the correct input signal type is
automatically detected except 1024
768 signals.
eXt 4 or 5
eXt 6
RGB cable
eXt 7
eXt 7
768 and 1360
g g

Displaying a pC image on the screen

Selecting the picture size

You can select the picture size.
1
Press f.
• The WIDE MODE menu displays.
2
Press f or a/b to select a desired item on
the menu.
note
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
eXample
normal
item
Full: An image fully fills the screen.
Cinema: For letter box pictures. Bars may appear on the
top and bottom with some programmes.
normal: Keeps the original aspect ratio in a full screen
display.
Dot by Dot: Displays an image with the same number of
pixels on the screen.
note
• Refer to page 29 for AV signals (480i/480p/576i/576p/
720p/1080i/1080p). The analogue D-sub terminal (EXT7) is
not compatible with 480i/576i/1080p signals.
Full