Analogue Channel Settings - Sharp Aquos LC-32B20E Operation Manual

Basic adjustment

analogue channel settings

Setup
programme Setup
analogue setting
You can reconfigure Analogue TV channels settings
automatically or manually.
additional search
E
Use this menu to add new channels automatically after
auto installation has been made.
• Start searching channels after selecting colour system and
sound system.
manual adjust
E
Use this menu to set up analogue TV channels
manually.
After selecting "Yes" on the screen, press a/b/
c/d to select the channel you want to set and
the press oK.
Fine
You can adjust the frequency to the desired position.
note
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0 - 9.
eXample
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s oK.
Colour sys.
Select the optimum colour system to receive. (Auto,
PAL, SECAM)
Sound sys. (Broadcasting systems)
Select the optimum sound systems (Broadcasting systems)
to receive. (B/G, D/K, I, L/L')
label
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel names.
1
Press a/b/c/d to select each character of
the new name for the channel, and then press
oK.
2
Repeat step 1 above until the name is fully spelt
out.
note
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select "END" to
set the channel name.
Skip
Channels with "Skip" set to "On" are passed over when using
pr/ps even if selected while watching the image from the
TV.
Decoder
When connecting a decoder to the unit, you need to select
EXT1 or EXT2.
note
• "Off" is factory preset value.
lock
You can block the viewing of any channel.
note
• See "Child Lock" for setting a PIN.
• When Lock is set to "On" for a channel, "Child lock has
been activated." displays, and the image and sound of the
channel are blocked.
• When pressing 6 while "Child lock has been activated."
displays, the PIN input menu will display. Inputting the
correct PIN lifts the child lock temporarily until the power is
turned off.
Sort
E
Channel positions can be sorted freely.
1
Press c/d to select "Yes", and then press oK.
2
Press a/b/c/d to select the channel you
want to move, and then press oK.
3
Press a/b/c/d to move it to the desired
position, and then press oK.
4
Repeat steps 3 and 4 until all desired channels
are sorted.
erase programme
E
An individual programme can be erased.
1
Press c/d to select "Yes", and then press oK.
2
Press a/b/c/d to select the channel you
want to erase, and then press oK.
• A message screen pops up.
3
Press c/d to select "Yes", and then press
oK to erase the selected programme. All the
subsequent programmes move up.
4
Repeat steps 3 and 4 until all desired channels
are erased.