Picture Size Settings; Selecting The Wide Screen Signalling (Wss) Picture Size Automatically; Selecting The Wide Screen Signalling (Wss) Picture Size Manually - Sharp AQUOS LC-42A63X Operation Manual

Watching TV

Picture size settings

Selecting the Wide Screen Signalling
(WSS) picture size automatically
WSS allows a television to switch automatically among
the different screen formats.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "WSS", and then press
3
ENTER.
Press a / b to select "On" or "Off", and then
4
press ENTER.
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
Selecting the Wide Screen Signalling
(WSS) picture size manually
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "4:3 Mode", and then
3
press ENTER.
Press a / b to select "Panorama" or "Normal",
4
and then press ENTER.
WSS signal 4:3 screen
4:3 mode "Panorama"
Selected item
Panorama Wide image without side bars
Normal Normal range keeping 4:3 or 16:9 aspect
ratio
4:3 mode "Normal"
Description
29