Optional Features Settings; Selecting The Picture Size Manually; Selecting The Wss Picture Size Automatically - Sharp LC-60LE830X Operation Manual

Useful viewing functions

Optional features settings

Go to "Menu" > "Setup" > "Option".
CH list
:Enter :Back

Selecting the picture size manually

Option
Wide mode
You can select the picture size. Selectable picture size
varies with the type of signal received.
1
Go to "Menu" > "Setup" > "Option" > "Option for
view" > "Wide mode".
• You can also select an item by pressing WIDE on the
remote control unit.
• The menu lists the "Wide mode" options selectable for
the type of video signal currently received.
2
Press a/b to select the desired item.
• As you toggle the options, each is immediately reflected
on the screen. There is no need to press A.
Basically, if you set "WSS" to "On" in the "Option"
menu, the optimum "Wide mode" is automatically
chosen for every broadcast or programme played
using a VCR or DVD player/recorder.
NOTE
• Even if you select your desired "Wide mode" manually, the
TV may automatically switch to the optimum "Wide mode"
depending on the signal received when "WSS" is set to "On".
Menu
Setup
Option
Option for view
3D setup
AQUOS LINK setup
Terminal setting
Item (for SD [Standard-Definition] signals)
Keeps the original aspect ratio in a full
Normal
screen display.
For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
Zoom 14:9
also see bars on the top and bottom
with some programmes.
In this mode, the picture is stretched
toward each side of the screen. The
Panorama
picture may appear similar to "Full"
depending on broadcast signals.
Full
For 16:9 squeeze pictures.
For 16:9 letterbox pictures. Bars may
Cinema 16:9
appear on the top and bottom with some
programmes.
For 14:9 letterbox pictures. Bars may
Cinema 14:9
appear on the top and bottom with some
programmes.
Item (for HD [High-Definition] signals)
Displays with an overscan image. Crops
Full
all sides of screen.
Displays with an underscan image only
when receiving a 720p signal. Displays
Underscan
with the High-Definition image adjusted
optimally. Noise may appear on the edge
of the screen with some programmes.
Displays an image with the same number
Dot by Dot
of pixels on the screen when receiving
1080i/1080p signals only.
NOTE
• Some items do not appear depending on the type of received
signal.
• You may not be able to change the wide mode while in 3D
mode.
• Refer to page 56 for PC signals.
Selecting the WSS picture size
automatically
Option
WSS
The "WSS" allows the TV to switch automatically among
the different picture size.
Go to "Menu" > "Setup" > "Option" > "WSS".
NOTE
• Use "Wide mode" if an image does not switch to the
appropriate picture size. When the broadcast signal contains
no "WSS" information, the function will not work even if
enabled.
• This function is available for 3D images converted from 2D
images or normal 2D images.
39