Preparation; Supplied Accessories; Attaching The Stand Unit - Sharp Aquos LC-32B20E Operation Manual

preparation

Supplied accessories

Remote control unit
(g1)
Pages 3 and 6
• Operation manual (This publication)

attaching the stand unit

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Caution
• attach the stand in the correct direction.
• Be sure to follow the instructions. incorrect installation of the stand may result in the tV falling over.
1
Confirm that there are 10 screws with the stand
unit.
2
Attach the supporting post for the stand unit
onto the base using the 6 screws with the screw
driver (supplied) as shown.
AC cord (g1)
Page 8
• "AAA" size battery (g2) ... Page 6
3
note
• To detach the stand unit, perform the steps in reverse
Cable clamp (g1)
Page 8
1 I nsert the stand into the openings on the
bottom of the TV. (Hold the stand so it will
not drop from the edge of the base area.)
2 I nsert and tighten the 4 screws into the
4 holes on the rear of the TV.
2
order.
Stand unit (g1)
Page 5
Soft
cushion
1