Before Operating; Getting Started; Stop/Clear; To Cancel A Programme During Cooking - Sharp R-6571L Operation Manual

BEFORE OPERATING

Getting Started

Step
Procedure
Plug the oven into a power point.
Ensure the oven door is closed.
1
Press the STOP/CLEAR pad so that the
oven beeps.
2

Stop/Clear

Use the STOP/CLEAR pad to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.

Heating without Food

Some smoke and odor may occur for a while at the beginning of GRILL, GRILL MIX, RUSSIAN MENU
or AUTO COOK mode, but the oven is not out of order.
To remove the cause of the smoke and odor, operate the oven without food for 20 min. on Grill before
the first use and after cleaning.
Step
Procedure
Ensure that no food is in the oven.
1 Press the GRILL pad.
Enter the heating time (20 min.).
2
Press the INSTANT COOK/START pad.
IMPORTANT:
During this operation, some smoke and
3
odor will occur. Therefore open the win-
dows or run the ventillation fan in the
room.
Open the door to cool the oven cavity.
WARNING:
4
The oven door, outer cabinet and oven cavity will become hot and pay attention to avoid burn
when cooling the oven.
Pad Order
Pad Order
COOK is flashing.
The timer will begin to count
down. When it reaches zero,
all indicators will go out and
audible signal will sound.
5
Display
Flashing eights.
Only the dots will remain.
Display