Before Operation; Setting The Clock - Sharp R-259 Operation Manual With Cookbook

Plug in the oven.
1. The oven display will flash:
2. Press the STOP/CLEAR key.
3. The display will show:
To set the clock, see below.
Your oven has a 12 hour and a 24 hour clock.
• To select the 12 hour clock, press the KITCHEN TIMER/CLOCK SET
key once.
• To select the 24 hour clock, press the KITCHEN TIMER/CLOCK SET
key twice.
To set the time of day follow the instructions below:
1. Select the
clock type
required.
4. Enter the minutes by
pressing the TIME keys.
NOTES:
• Press the STOP/CLEAR key if you make a mistake during programming.
• If you press any of the TIME keys too many times, continue to press the key until the desired time
re-appears.
• To check the time of day during a cooking process, press the KITCHEN TIMER/CLOCK SET key
and the time of day will remain on the display as long as you keep your finger on the key. This does not
affect the cooking process.
• If the clock is set, when cooking is complete, the display will show the correct time of day.
If the clock has not been set, the display will only show
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently
show after the power is reinstated. If this occurs during cooking, the programme will be
erased. The time of day will also be erased.
• When you want to reset the time of day, follow the above example again.

BEFORE OPERATION

SETTING THE CLOCK

will appear on the display.
will appear on the display.
2. Enter the hours by
pressing the TIME
keys.
5. To start the clock, press the
KITCHEN TIMER/CLOCK
SET key once.
1.
2.
3.
x1
when cooking is complete.
8
x1
3. Press the KITCHEN
TIMER/CLOCK SET
key once.
x1
x1
x2