Setting Up The Handset For Use - Siemens Gigaset SL400H User Manual

Setting up the handset for use

The display is protected by a plastic film.
Please remove the protective film!
Inserting the battery and closing the battery cover
Please note
Use only rechargeable batteries recommended by Gigaset Communications
GmbH (
injury. For example, the outer casing of the battery could be destroyed or the
battery could explode. The phone could also malfunction or be damaged as a
result of using batteries that are not of the recommended type.
¤
First insert battery with the con-
tact surface facing down a.
¤
Then press the battery down-
wards
To reopen the battery cover to replace the battery:
¤
Remove the belt clip (if
attached).
¤
Insert your fingernail into the
notch at the bottom of the
casing and pull the battery
cover upwards.
To change the battery, insert
your fingernail into the notch in
the casing and pull the battery
upwards.
¢
page 36), as this could result in significant health risks and personal
until it clicks into place.
b
b
¤
First, align the protrusions
on the side of the battery
cover with the notches on
the inside of the casing.
¤
Then press the cover until it
clicks into place.
First steps
a
9