Smeg Hob Instructions For The Installer page 5

Instructions for the installer
The appliance is fitted with a terminal board at the rear for electrical
connections (see following diagram). To access, remove the rear cover.
For operation on 380-415V3N
H05V2V2-F-type five-core cable (5 x 2.5
mm 2 ).
For operation on 220-240V
H05V2V2-F-type three-core cable (3 x 6
2
mm ).
The cable end to be connected to the
appliance must be provided with an ground
wire (yellow-green) at least 20 mm longer.
∼
: use an
∼
: use an
39