Using The Hob - Smeg Hob Instructions For The User

5. USING THE HOB

Do not place anything, e.g.
flame tamer, asbestos mat,
between
supports
damage to the appliance
may result.
Make sure that the fastening rings, the burners, the crowns
flame spreader and the racks are assembled correctly.
Pins A of the flame-spreader crowns must be inserted into
the housings B of the burner. The 2 burner holes are
inserted in the igniter and thermocouple on the hob.
5.1 Positioning the racks
The racks are provided separate unassembled on the hob. To position each rack correctly
on its burner, follow the instructions below:
Each rack must be positioned on the corresponding burner in order to guarantee proper
operation. Be very careful to match the different central diameters of the racks to the
flame-spreader crowns.
10
Instructions for the user
Do not remove the pan
support and enclose the
pan and pan burner with a wok stand as
as serious this will concentrate and
deflect
hotplate.
Do not use large pots or
heavy weights which can
bend the pan support or
deflect
heat onto the hotplate.
flame onto the