Table of Contents
Advertisement
Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / pabx.fm / 7.11.07
Setting options
You can switch between the settings
Tone
Dial,
Auto. Tone Dial
Once normal dialling has been acti-
vated, * and # are not transmitted dur-
ing dialling and if * and # are entered it
is not possible to switch to the keypad.
Auto. Keypad
Once * or # have been entered, this set-
ting automatically switches signalling
during dialling to the keypad. This auto-
matic switchover is needed for giving
commands to the exchange or PABX.
Dial of * and #
Once Dial of * and # has been acti-
vated, the * and # characters are trans-
mitted during dialling as commands to
the exchange or PABX.
Regardless of the setting options above,
after dialling or during a call, the phone
automatically switches to touch tone dial-
ling (DTMF), e.g. for remote control of an
answer machine.
¢
v
Ð
¢
Dialling Mode
q
68
Auto. Keypad
and
Dial of * and
¢
¢
Base
Add. Features
Select setting and press
e.g.
(‰ = on).
Auto. Tone Dial
Activating/deactivating a keypad
during a call
Auto.
#.
In addition to the permanent settings
described above, you can also switch tem-
porarily to the keypad.
The setting only applies to the current
external call and is automatically deacti-
vated after the call is ended.
Depending on whether
activated, you may need to activate or
deactivate
§Options§
Keypad
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
Please note:
There are several ways of assigning an MSN
after ISDN extension systems. For more infor-
mation on this topic, please refer to the man-
ual belonging to your extension system.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
,
§OK§
Auto. Keypad
during the call.
Keypad
Open menu.
Select and press
(‰ = on).
§OK§
is
Advertisement
Table of Contents
