Table of Contents
Advertisement
Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / starting.fm / 7.11.07
ECO DECT
ECO DECT reduces power consumption by
using a power supply with low power con-
sumption and also reduces the transmis-
sion power of the base station.
If only one handset is registered and it is in
the base station, eco mode is always acti-
vated automatically. In this case, the
transmission power of the base station is
reduced to the minimum.
You can use your handset to reduce the
transmission power on the base station
manually even when the handset is not in
the base station.
By doing so, you will reduce the transmis-
sion power even if you have several hand-
sets registered.
Your handset also reduces the transmis-
sion power depending on the distance to
the base station.
Activating/deactivating eco mode:
¢
v
Ð
¢
Eco Mode
§OK§
When eco mode is activated manually, the
½
icon is displayed at the top of the
screen. If eco mode is activated automat-
ically (only one handset is registered and
it is in the base station) and eco mode has
not been activated via the menu, then the
icon is not displayed.
Please note:
– Activating eco mode reduces the range of
the base station.
– Eco mode and any repeater support (see
page 66) cancel each other out, i.e. both
functions cannot be used at the same time.
– If external handsets (GAP) and handsets
from earlier Gigaset versions are used, your
handset will not automatically reduce the
transmission power to the base station.
¢
¢
Base
Add. Features
Press the display key
‰
(
= activated).
Setting up the base station –
Installation assistant
A few settings are necessary before using
your telephone. The installation assistant
is designed to help you with this.
If you place the first handset in the charg-
ing cradle before the MSN settings have
been entered, the message key begins to
flash after around 20 minutes (page 1).
¤
Press the message key f to start the
installation assistant.
You can also call up the installation assist-
ant at any time from your handset
(page 14).
The following settings can be made one
after the other.
u
Determining or entering MSNs for your
phone connection
u
Setting the receive MSN
u
Setting the send MSN
What is an MSN?
MSN = Multiple Subscriber Number. You
can request up to 10 different telephone
numbers for the ISDN multiple connec-
tion. An MSN is one of the phone num-
bers assigned to you without an area
code (dialling code).
Your telephone uses the MSN entirely as
you require. The following differentiation
is made:
u
Receive MSN: numbers you can be
called on. You can assign the receive
MSNs to specific internal subscribers
(terminals). Incoming calls are only for-
warded to the terminals to which the
relevant receive MSN has been
assigned. Examples of terminals are
handsets or answer machines.
u
Send MSN: numbers that are identified
to the person you are calling. The net-
work provider calculates charges based
on the send MSNs. You can assign a
First steps
13
Advertisement
Table of Contents
