Assigning An Msn; Setting Up A Busy Signal For When The Msn Is Being Used; (Busy On Busy) - Siemens Gigaset SX670 isdn User Manual

Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 7.11.07
¢
v Ð
¢
(system PIN if necessary)
MSN
q
§Edit§
~
s ~
§Save§
Deleting an MSN
¢
v Ð
¢
MSN (system PIN if necessary)
q
§Delete§
If the MSN you have deleted was the send
MSN (page 62) of an internal subscriber
then a new send MSN (the MSN with the
lowest ranked number) will automatically
be assigned to this internal subscriber.

Assigning an MSN

You can assign individual MSNs to the reg-
istered devices. This determines
u
which number makes a registered ter-
minal ring (receive MSN),
u
under which number an internal sub-
scriber dials (send MSN).
Assigning a receive MSN
If you only want to assign the handset spe-
cific incoming MSNs:
u
q
§Options§
Config. Device
~
62
¢ ¢ ¢
Base ISDN Configure
Select MSN, e.g. MSN
Press the display key.
Enter number (max. 20 digits)
(without area code = prefix).
If necessary, scroll to the first
line and enter the name (max.
16 digits) (optional).
Press the display key.
¢ ¢ ¢
Base ISDN Configure
Select MSN, e.g.
MSN
Press the display key.
Open the list of internal sub-
scribers.
Select internal number for the
handset, e.g. INT 1.
Open menu.
Select and press .
§OK§
If required, enter PIN and press
.
§OK§
Receive MSN
q
1.
a
Assigning a send MSN
You can define one send MSN for each
internal subscriber. This MSN is shown to
the person you call and the call is also
charged to this MSN.
u
q
1.
§Options§
Config. Device
~
Send MSN
q
a
Setting up a busy signal for
when the MSN is being used

(Busy on Busy)

This setting allows callers to get a busy
tone immediately when an external call is
already being made on this MSN, irrespec-
tive of the
¢
v Ð
Busy on Busy
Select and press .
§OK§
Select MSN and press
e.g.
MSN 1.
Press and hold (idle status).
Open the list of internal
subscribers.
Select internal number,
e.g. INT 1.
Open menu.
Select and press .
§OK§
If required, enter PIN and press
.
§OK§
Select and press .
§OK§
Select MSN and press
e.g. MSN 1.
Press and hold (idle status).
Call Waiting setting (page 63).
¢ ¢
Base ISDN
Select and press (‰ = on).
§OK§
,
§OK§
,
§OK§