Satellite Settings - Toshiba WL9*8 Series User Manual

SETTING UP YOUR TV
d
When Ant/Cable/Satellite is set to Cable, the
following setting options will be provided in the Auto
Tuning screen.
B b
Press or to select an item and press
select your desired option.
Auto Tuning
Tuning Mode
Start Scan
DTV
Operator Selection
Scan Type
Start Frequency
End Frequency
Modulation
Symbol Rate
Network ID
With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
Operator Selection:
You can choose the Cable operator depending on the
Country you set.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to "Full Scan".
C c
or to
DTV and ATV
Others
Quick Scan
Auto
Auto
Auto
Auto
Auto
20

Satellite Settings

From the System Setup menu, you can add the satellites that you
wish to tune and configure detailed settings for each one
individually.
To add a satellite:
a
C c
Press MENU / to highlight Setup icon.
b
B C c
Press / to highlight System Setup icon and
press OK.
c
b
Press to select Satellite Settings and press OK.
Satellite Settings
Switch Type
LNB Power
No. Satellite
ASTRA 19.2˚E
1
2
3
4
Transponder: 1/85 (10729 MHz)
Dish Type: Fixed
Lower LOF: 9750
Upper LOF: 10600
d
b
Press to highlight a new line to add an another
satellite and press OK.
e
b
Press until the required satellite is displayed and
press OK.
To delete a satellite:
a
In the Satellite Settings menu, press
the satellite you want to delete.
b
Press the RED button. A confirmation window will
appear.
c
C c
Press or to select Yes and press OK.
NOTE: It is not possible to delete position No.1.
None
On
Dish LNB
1 1
Done
B b
or to select