Channels (Satellite); Standby Channel Update; Location Setting; Analogue Switch-Off - Toshiba WL9*8 Series User Manual

Move
— Press the GREEN button to activate the
Move feature. Press the
channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat
as necessary.
Once all desired channels have been checked, press
B b
the or buttons to place the focus at the position
to which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.
Channels
Line No. 1/10
Pos. Name
1 ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
Position No. Sort
confirmation window will appear. Press
select Yes and press OK.
Your existing channel order will be lost. Do you
wish to continue?

Channels (Satellite)

a
Select DTV Settings from the System Setup menu
and press OK.
b
Select Channels and press OK.
The satellite channel list will appear.
Channels
Line No. 3/20
Pos. Name
1 DDD
2 AB
3 E
801 BBC
802 BB
803 BA
822 AA
823 AC
B b
or buttons to select the
Antenna TV
— Press the YELLOW button. A
C c
or
Yes
Satellite TV
Satellite
19.2°E
19.2°E
19.2°E
22.5°E
22.5°E
22.5°E
25.6°E
25.6°E
c
For your convenience, you can edit and sort your
channel list.
Line Number Jump
(0-9) to input the line number you want to select and
press OK.
Satellite Jump
next channel on a different Satellite.
Renumber
See page 26.
Move
— Same as Antenna/Cable channels. See
page 27.
Position No. Sort
confirmation window will appear. Press
select Yes and press OK.

Standby Channel Update

If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed.
a
Select DTV Settings from the System Setup menu
and press OK.
to
b
b
Press
C
press or
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
the television for displaying in a shop, etc.
a
Select Location from the System Setup menu.
b
C
Press or

Analogue switch-off

This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This 'switch-off' will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
27
SETTING UP YOUR TV
— Press the number buttons
Z z
— Press or
— Same as Antenna/Cable channels.
— Press the YELLOW button. A
to select Standby Channel Update and
c
to select On.

Location setting

c
to select Home or Store.
to jump to the
C c
or to