Digital Settings - Other Settings; Subtitles; Audio Languages; Common Interface - Toshiba WL9*8 Series User Manual

Digital settings – other settings

Subtitles

In digital mode, this feature will show subtitles on the screen in
the selected language provided they are being broadcast.
a
In the DTV Settings menu, press
Subtitle and Audio and press OK.
b
b
Press to select Subtitle Display and press
to select On or Off.
Subtitle and Audio
Subtitle Display
Subtitle Type
Primary Subtitle Language
Secondary Subtitle Language
Audio Type
Primary Audio Language
Secondary Audio Language
c
B b
Press or to select Primary Subtitle Language or
Secondary Subtitle Language and press
select an option.
The SUBTITLE button can be used to select subtitle on or off
for the current channel only and to select the subtitle
language if more than one subtitle is available.

Audio languages

This feature allows a programme or film to be viewed with a
choice of soundtrack language, provided multiple language
tracks are being broadcast.
a
In the Subtitle and Audio menu, press
select Audio Type and press
or For Hard of Hearing.
b
B b
Press or to select Primary Audio Language or
Secondary Audio Language and press
select an option.
If more than one soundtrack is available, use the s
button to select between them.
B b
or to select
C c
or
Off
Normal
English
English
Normal
English
English
C c
or to
B b
or to
C c
or to select Normal
C c
or to
79

Common Interface

The Common Interface Slot, situated on the side of the television,
enables the insertion of a CAM (Conditional Access Module) and
card. These are purchased from a service provider and allow
additional subscription broadcasts to be viewed. For
information, see a service provider.
a
Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the
CAM. A box will appear on screen to confirm that the
CAM has been inserted.
b
C c
Press MENU / to highlight Setup icon.
c
B C c
Press / to highlight System Setup icon and
press OK.
d
B b
Press or to select DTV Settings and press OK.
e
B b
Press or to select Common Interface and press
OK.
f
Details of the CAM should now be available.
NOTE:
• Software update of a CI Plus CAM may occur automatically
if instigated by the broadcaster. This could cause the
cancellation of any Reminders/Recordings during this
process.
• Some CI or CI+ CAM may not be supported.
• CI+ operation is not guaranteed except for Canal Ready DTT
services on suffix FC models.
CONTROLS AND FEATURES