Digital Audio Output; Using Hdmi Cec Control; Enable Hdmi Cec Control; Tv Auto Power - Toshiba WL9*8 Series User Manual

Digital Audio Output

When connecting a surround sound amplifier to the digital audio
output (Sony/Philips Digital Interface Format [S/PDIF]), the
following options can be selected or adjusted.
a
In the Preferences menu, press
Connection and press OK.
b
B b
Press or to select Digital Audio Output.
AV Connection
Input Labeling
Digital Audio Output
c
Press OK to display Digital Audio Output menu and
B b
press or to select an option.
Audio Format
C c
Press or to select PCM or Auto.
PCM: This mode outputs PCM format to the digital
audio output socket.
Auto: This mode outputs Dolby Digital (if available)
or PCM to the digital audio output socket.
Dolby Digital
Dolby Digital Plus
S
MPEG PCM
S
HE-AAC Dolby Digital
Audio Delay
C c
Press or to select Auto or Manual.
Auto: This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large between
the image and sound depending on the
connected equipment (amplifier etc.). In that
case, select Manual.
Manual:You can manually adjust the audio signal
timing to meet the video signal timing.
Delay Adjustment
C c
Press or to adjust the audio signal timing
(0 – 250ms) to meet the video signal timing.
NOTE:
• This feature is grayed out when Audio Delay is in
Auto.
• A time lag will occur when the video signal or audio
signal is changed. Adjust the timing accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may occur
when the signal is changed.
• Depending on the connected equipment (amplifier,
etc.), adjustment may not be possible.
• When the optical digital output setting (Auto
changed, it may be necessary to adjust the timing again.
• Do not use other than for audio output from the AV
amplifier, etc. (Malfunction may occur)
B b
or to select AV
S
Dolby Digital
S
Dolby Digital
t
PCM) is

Using HDMI CEC Control

This is a new feature that uses CEC technology and
allows you to control Toshiba HDMI CEC Control
compatible devices from the television remote
control via HDMI connection (page 10).
When the Enable HDMI CEC Control item in the HDMI CEC
Control Setup menu is set to On, individual functions also set
to On will be activated.

Enable HDMI CEC Control

a
Press MENU /
b
B C c
Press /
press OK.
c
B b
Press or to select HDMI CEC Control Setup and
pres OK.
d
b
Press to select Enable HDMI CEC Control and
C c
press or to select On.
HDMI CEC Control Setup
Enable HDMI CEC Control

TV Auto Power

Auto Standby

Amplifier Control
Initial Speaker Setting
NOTE: If you set Enable HDMI CEC Control to Off, all
other items will be grayed out.
TV Auto Power
The TV Auto Power setting allows the television to be
automatically switched on if a HDMI CEC Control device is turned
a
In the HDMI CEC Control Setup menu, press
highlight TV Auto Power.
b
C c
Press or to select On or Off.
Auto Standby
When Auto Standby is enabled, the television, when switched
off, will automatically switch off (standby mode) all connected
HDMI CEC Control equipment.
a
In the HDMI CEC Control Setup menu, press
highlight Auto Standby.
b
C c
Press or to select On or Off.
83
CONTROLS AND FEATURES
C c
to highlight Setup icon.
to highlight Preferences icon and
On
On
On
On
TV Speakers
on.
b
to
b
to