Configuring Your Tv's Settings; Viewing Settings Menu; Conditional Access; Language - Toshiba 48L344 DG Online Manual

Settings Menu Operation, Conditional Access

Configuring Your TV's Settings

Detailed settings can be configured to suit your
personal preferences.

Viewing Settings Menu

Press MENU button and select Settings by using Left
or Right button. Press OK button to view Settings
menu.
Operating Settings Menu Items
• Press Up or Down button to highlight a menu item.
• Press OK button to select an item.
• Press MENU button to exit.

Conditional Access

This setting controls conditional access modules
when available. Use Up or Down button to highlight
Conditional Access. Press OK button to continue.

Language

Configures language settings. See page 22.

Parental

Configures parental settings. See page 23.

Timers

Sets timers for selected programmes. See page 30.

Date/Time

You can configure date/time preferences by using this
menu screen. See page 30.

Sources

Enables or disables selected source options. See
page 31.

Network Settings

Configures network settings. See page 34.

Satellite Settings

Configures satellite settings. See page 31.
Displays other setting options of the TV set.

Using a Conditional Access Module

The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from
a service provider and allow additional subscription
broadcasts to be viewed. For more information, see
a service provider.
IMPORTANT: Insert or remove the CAM only when
the TV is SWITCHED OFF.
• In order to watch certain digital channels, a
conditional access module (CAM) is necessary.
This module must be inserted in the CI slot of
your TV.
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on and
then wait for few moments until the card is activated.
• When no module is inserted, "No common
interface module detected." message appears
on the screen.
• Refer to the module instruction manual for details
of the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
Press MENU button and select Settings by using
Left or Right button. Press OK button to view
Settings menu. Use Up or Down button to highlight
Conditional Access and press OK to view menu
items.
English - 29 -

Other Settings