Smeg Hob Instructions For The User page 19

Table of Contents

Advertisement

Instructions for the user
7.6 Spit cooking
FUNCTION SWITCH
THERMOSTAT SWITCH AT MAXIMUM
Prepare the spit with the food, blocking fork screws A. Insert frame B into
the third guide from the bottom. Remove handle D and position the spit
shaft so that pulley E is guided on the link of frame B in the right side.
Insert the drip tray into the oven as far as it will go until the tip of the rod is
in line with the hole C. Now rock the frames B to insert the tip of the rod
into the drive connection C of the rotisserie motor on the side of the oven.
Pour a bit of water into the pan to avoid smoke from the dripping.
Keep the oven door closed during cooking.
It is normal for the thermostat light to switch on and off at regular
intervals during cooking; it indicates that the temperature inside the oven
is being kept constant.
CAUTION: the frames B must be fitted
as shown in the diagram
47

Advertisement

Table of Contents
loading

Table of Contents