Table of Contents
Advertisement
2. The mapped network drive could not be created because the following
error has occurred: Multiple connections to a server or shared
resource by the same user, using more than one user name, are
not allowed. Disconnect all previous connections to the server or shared
resource and try again.
To check out existing network connections, type net use under the DOS prompt.
N299 Chassis Feels Hot
The N299 uses its chassis to dissipate heat, and feeling warm to the touch is
completely normal. As such, make sure that the N299 is left in a well-ventilated
area to avoid overheating the unit.
Can't Find Printer Server / Media Server / Download Manager
To use these functions, you must first install their respective modules. Once
installed, these will appear on the Main Menu. For installation instructions, refer
to the sections below:
Chapter 4: Additional Feature Setup>
Chapter 4: Additional Feature Setup>
Chapter 4: Additional Feature Setup>
Restoring Factory Defaults
From the System menu, choose the Factory Default item and the Reset to
Factory Default screen appears. Press Apply to reset the N299 to factory
default settings.
WARNING
Problems with Time and Date Settings
The administrator is able to select an NTP Server to keep the N299's time
synchronized. However, if the N299 can not access the Internet, you may
encounter a problem when setting the Time and Time Zone. If this happens:
1. Login to the Web Administration Interface.
2. Navigate to System > Time.
3. Under NTP Server, select No.
4. Set the Date, Time, and Time Zone.
5. Click Apply.
In addition, if the N299 is able to access the Internet and you want to keep the
NTP Server clock.isc.org by default, please make sure the DNS Server is
correctly, thereby allowing the NTP Server name to correctly resolve. (See
Network > LAN 1 > DNS Server)
Media Server Module Installation
Download Manager Module Installation
Printer Server Module Installation
Resetting to factory defaults will not erase the data stored in the hard disks, but
WILL revert all the settings to the factory default values.
82
Advertisement
Table of Contents
