Raid 1; Jbod; Stripe Size; Disk Usage - Thecus N299 User Manual

RAID 1

RAID 1 mirrors all data from one hard disk drive to a second one hard disk drive,
thus providing complete data redundancy. However, the cost of data storage
capacity is doubled.
This is excellent for complete data security.

JBOD

Although a concatenation of disks (also called JBOD, or "Just a Bunch of Disks") is
not one of the numbered RAID levels, it is a popular method for combining
multiple physical disk drives into a single virtual one. As the name implies, disks
are merely concatenated together, end to beginning, so they appear to be a
single large disk.
As the data on JBOD is not protected, one drive failure could result total data loss.

Stripe Size

The length of the data segments being written across multiple hard disks. Data is
written in stripes across the multiple hard disks of a RAID. Since multiple disks
are accessed at the same time, disk striping enhances performance. The stripes
can vary in size.

Disk Usage

When all 4 disks are of the same size, and used in RAID, the N299's disk usage
percentage is listed below:
RAID Level Percentage Used
RAID 0
RAID 1
JBOD
88
100%
50%
100%