Stopping Engine - Yamaha F200C Owner's Manual

Outboard motor f200c; lf200c; f225c; lf225c
Hide thumbs Also See for F200C:
Table of Contents

Advertisement

EMU00273

STOPPING ENGINE

Let it cool off for a few minutes at idle or low
speed first. Stopping the engine immediately
after operating at high speed is not recom-
mended.
EMU01199¯
1) Turn the main switch to "OFF".
2) If there is a fuel joint or a fuel cock on
the boat, disconnect the fuel line or
close the fuel cock after stopping the
engine.
3) Tighten the air vent screw on the fuel
tank cap after stopping the engine, if it is
equipped.
4) Remove the key if the boat will be left
unattended.
NOTE:
@
The engine can also be stopped by pulling
the lanyard and removing the lock plate from
the engine stop lanyard switch (then turning
the main switch to "OFF").
@
3-10
E

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F225cLf200cLf225c

Table of Contents