Replacing Fuse - Yamaha F200 Owner's Manual

Outboard motor f200; lf200; f225; lf225
Hide thumbs Also See for F200:
Table of Contents

Advertisement

Trouble Recovery
EMU29492

Replacing fuse

If the fuse has blown on an electric start mod-
el, open the fuse box and use a fuse puller to
replace the fuse with a spare one of the prop-
er amperage.
EWM00630
WARNING
Be sure to use the specified fuse. An in-
correct fuse or a piece of wire could allow
excessive current flow. This could cause
electric system damage and a fire hazard.
ECM01382
CAUTION:
If a main fuse has blown, be sure to also
G
check the other main fuse.
If the outboard motor is operated after a
G
main fuse has blown charging capability
will be insufficient, and the engine will
not start.
67
1. Fuse box
2. Fuse puller
1. Spare fuse (5 A, 20 A, 30 A)
2. Engine control unit / ignition coil / electric
fuel pump / fuel injector / ISC (idle speed
control) fuse (20 A)
3. Rectifier Regulator (Accessory) fuse (30 A)
4. Main switch / trim switch fuse (20 A)
5. Fuel feed pump fuse (5 A)
6. Rectifier Regulator (Main) fuse (30 A)
7. Starter relay fuse (30 A)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lf200F225Lf225

Table of Contents