Fuel Management Meter; Fuel Flow Meter - Yamaha F200 Owner's Manual

Basic components
EMU26740

Fuel management meter

The fuel management meter shows the state
of the fuel consumption while the engine is
running.
1
3

1. Fuel flow meter

2. Fuel consumption meter / Fuel economy
meter / Twin engine speed synchronizer
3. Water separator warning indicator (operates
only if the sensor has been installed)
NOTE:
After the main switch is first turned on, all seg-
ments of the display come on as a test. After
a few seconds, the gauge will change to nor-
mal operation. Watch the gauge when turning
on the main switch to make sure all segments
come on.
EMU26750
Fuel flow meter
The fuel flow meter displays the amount of
fuel flow over a one hour period, at the current
rate of engine operation.
If twin engines are installed on your boat, the
fuel flow meter displays the total fuel flow of
both the port and starboard engines. It also
displays " " (for port and starboard).
23
Use the "
2
display in the following order:
Press the "
G
ZMU01748
the fuel flow of the starboard engine. An " "
(for starboard) will also be displayed.
Press the "
G
display the fuel flow of the port engine. A " "
(for port) will also be displayed.
Press the "
G
return the display to the total fuel flow of
both engines. "
will also be displayed to indicate both the
port and starboard engines.
NOTE:
The fuel flow meter displays gallons/hour or
G
liters/hour according to operator prefer-
ence. Select the desired unit of measure-
ment by setting the selector switch on the
back of the gauge during installation.
1. Selector switch
" (set) button to rotate the fuel flow
" (set) button once to display
" (set) button a second time to
" (set) button a third time to
" (for port and starboard)
ZMU01749