Replacing Fuse - Yamaha F350A Owner's Manual

EMU29471

Replacing fuse

If a fuse has blown, remove the electrical
cover, open the fuse holder and remove the
fuse with a fuse puller (if equipped). Replace
it with a spare one of the proper amperage.
EWM00630
WARNING
Be sure to use the specified fuse. An in-
correct fuse or a piece of wire could allow
excessive current flow. This could cause
electric system damage and a fire hazard.
NOTE:
Consult your Yamaha dealer if the new fuse
immediately blows again.
Trouble Recovery
3 2
3
1. Electrical cover
2. Fuse puller
3. Spare fuse (10 A, 15 A, 20 A, 30 A, 80 A)
9 8
1. Fuel feed pump fuse (10 A)
2. Ignition coil / Fuel injector / Variable camshaft
timing / Engine ECM (Electronic control mod-
ule) fuse (30 A)
3. Fuel pump fuse (15 A)
4. Starting switch (30 A)
5. Main switch / PTT switch / Remote control
ECM (Electronic control module) fuse (20 A)
1
3
3
ZMU05874
6 5 4 3 2 1
ZMU05875
7
1
76