Trouble Recovery
ECM00371
NOTICE
If the boat is operated with one engine in
the water but not running, water may run
into the exhaust pipe due to wave action,
causing engine trouble.
TIP:
When you are maneuvering at low speed,
such as near a dock, it is recommended that
both engines be running with one in neutral
gear if possible.
EMU46602
Replacing fuse
EWM00632
WARNING
Substituting an incorrect fuse or a piece of
wire could allow excessive current flow.
This could cause electric system damage
and a fire hazard.
If a fuse has blown, replace the fuse accord-
ing to the following procedure.
1.
Turn the main switch to the "
position.
2.
Remove the fuse box cover.
3.
Remove the fuse with a fuse puller, and
then replace it with a spare one of the
proper amperage.
100
7
1
1. Fuse box cover
2. Main switch / PTT switch fuse (20 A)
3. Electric throttle valve fuse (10 A)
4. Starter relay fuse (30 A)
5. Ignition coil / Fuel injector / Variable cam-
shaft timing / ECM (Electronic Control Mod-
ule) fuse (30 A)
6. Isolator fuse (60 A)
7. Engine main fuse (60 A)
1
4
" (off)
1. Fuse box cover
2. Fuse puller
3. Spare fuse (10 A, 20 A, 30 A)
4. Spare main fuse (60 A)
2
3
4
5
2
6
ZMU05156
3
ZMU05157