Maintenance - Chicago Electric 46055 Assembly And Operating Instructions Manual

Variable speed
Table of Contents

Advertisement

8. When cutting metal, use a nail and score the cutting line prior to cutting so that the
blade will stay on a straight course. Metal heats up quickly
when cutting due to blade friction. To avoid ruining your blade
and insure a clean cut, use cutting oil (not included) as a cooling
agent. Apply a few drops where the blade meets the workpiece
as shown in Figure 7. Continue to keep the area lubricated
throughout the operation.
Warning! Before doing any maintenance on the Jigsaw, make sure it is unplugged from the
power source and the switch is off.
1. After each use, blow out the saw with compressed air.
2. Wipe the saw clean with a soft, damp cloth. Do not use abrasives or solvent to clean saw.
3. Check the blade prior to each use. If the blade is bent or has broken teeth, replace. Blades
are available at Harbor Freight Tools.
4. If there is a noticeable loss in performance, the brush may be worn and in need of replacement.
Have an authorized service technician replace the brush.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals known [to the State of California] to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement or other masonry products
Arsenic and chromium from chemically treated lumber
(California Health & Safety Code 25249.5, et seq. )
SKU 46055
Operation (continued)

Maintenance

Page 11
Figure 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF