Advertisement
Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO pREVENT SERIOUS INJURY FROM AccIDENTAL OpERATION:
Release the Trigger, unplug the tool from its electrical outlet, and
allow it to cool completely before adjusting tool or installing accessories.
TO pREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning and Maintenance
1. BEFORE EAcH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
Troubleshooting
problem
Hot Knife will not turn on.
Hot Knife does not maintain
pre-selected heat temperature
during operation.
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect power supply before service.
Record product's Serial Number Here:
Note: If product has no serial number,
record month and year of purchase instead.
Page 10
possible cause
1. No power at electrical outlet.
2. Trigger not pressed.
Trigger not pressed and held.
For technical questions, please call 1-800-444-3353.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3.
WARNING! If the supply cord
of this power tool is damaged,
it must be replaced only by a
qualified service technician.
1. Check power at outlet.
2. Press and hold Trigger.
Press and hold Trigger
throughout operation.
Note: Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.
possible Solution
Item 61423
Advertisement
