Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Owner's Manual & Safety Instructions
Save This Manual
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
Keep this manual and the receipt in a safe and dry place for future reference.
the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
please call 1-888-866-5797 as soon as possible.
©
©
Copyright
2020 by Harbor Freight Tools
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
®
®
. All rights reserved.
. All rights reserved.
Read this material before using this product.
Read this material before using this product.
Failure to do so can result in serious injury.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
SAVE THIS MANUAL.
20c
Advertisement
Table of Contents
Related Manuals for Chicago Electric 57226
Summary of Contents for Chicago Electric 57226
- Page 1 Owner’s Manual & Safety Instructions Owner’s Manual & Safety Instructions Save This Manual Save This Manual Keep this manual for the safety warnings and precautions, assembly, Keep this manual for the safety warnings and precautions, assembly, operating, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the inspection, maintenance and cleaning procedures.
-
Page 2: Important Safety Information
3. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. Page 2 For technical questions, please call 1-888-866-5797. Item 57226... -
Page 3: Personal Safety
Failure to follow all instructions listed below may tool, it does not assure safe operation. result in electric shock, fire and/or serious injury. Item 57226 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 11. Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing, pulling the accessory into your body. Page 4 For technical questions, please call 1-888-866-5797. Item 57226...
-
Page 5: Vibration Safety
Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Item 57226 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Extension Cords
Properly connect power cord to appropriate outlet. n 0 xxxx/ No Load Revolutions per Minute (RPM) min. WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved safety goggles with side shields. Page 6 For technical questions, please call 1-888-866-5797. Item 57226... -
Page 7: Specifications
3 Cut Off Wheels 2 Diamond Burrs 2 Brass Collets Accessories 2 Mandrels 1 Buffing Wheel 1 Square Stone Dresser 1 Wire Wheel Brush 1 Drill Bit 1 Flat Wrench 1 Soft Brush Item 57226 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 3. Secure loose work pieces using a vise or clamps for sparks and debris that will fly off the (not included) to prevent movement while working. work surface. CAUTION! Always have access to a type AAA fire extinguisher. Page 8 For technical questions, please call 1-888-866-5797. Item 57226...
-
Page 9: Setting The Speed
5. When finished using the tool, turn OFF the Power Switch and unplug the tool. Allow the tool to cool, then wipe clean and store all parts in the included case. Item 57226 For technical questions, please call 1-888-866-5797. Page 9... - Page 10 Soft Brush Cleaning 9,000-11,000 9,000-11,000 9,000-11,000 8,000 17,000 Diamond Etching, 25,000- 25,000-35,000 18,000-24,000 25,000-35,000 25,000-35,000 Burrs Engraving 35,000 Grinding 18,000- Sharpening 25,000-35,000 25,000-35,000 9,000-11,000 12,000-17,000 25,000-35,000 Stones 24,000 Recommended Accessory Speeds Page 10 For technical questions, please call 1-888-866-5797. Item 57226...
-
Page 11: Maintenance And Servicing
Any grinding or cut-off wheels exposed to humidity or freezing temperatures must not be used. Keep all accessories out of the reach of children. Item 57226 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Troubleshooting
Use only proper type of disc accessory. Accessories must be in good condition. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 12 For technical questions, please call 1-888-866-5797. Item 57226... -
Page 13: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 57226 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Accessories Parts List
Part Description Sanding Disc Cut Off Wheel Buffing Wheel Flat Wrench Brass Collet Soft Brush Sanding Drum Diamond Burr Square Stone Dresser Mandrel Wire Wheel Brush Grinding Stone Drill Bit Page 14 For technical questions, please call 1-888-866-5797. Item 57226... - Page 15 Collet Nut Screw Collet Speed Control Dial Nose Cap Stator Lock Button Trim Board Base Power Switch Bearing Hanger Cord Sleeve Rotary Plug Left Housing Cord Carbon Brush Right Housing Item 57226 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.