General Safety Rules - Chicago Electric 46055 Assembly And Operating Instructions Manual

Double Insulated Motor
Variable Speed Range
Maximum Cutting Depth
Stroke
Cord
Includes 6 TPI and 24 TPI Blades and Tiltable Base (TPI = Teeth per Inch)
This Jigsaw uses Universal (U) Shank Blades.
Replacement Blade ITEM #: 02713 - 14 Pc. Jigsaw Blade Set.
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Keep the
manual and invoice in a safe and dry place for future reference.
Failure to follow all instructions listed below may result in
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.
4. Grounded tools must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. Never remove the grounding prong
or modify the plug in any way. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded. If the
tools should electrically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user.
SKU 46055
Specifications
3.5 Amps, 120 V / 60 Hz / Single Phase
500-3000 SPM, Six Speed Settings
2-1/8 inch
3/4 inch
18 Gauge, Two Prong
Save This Manual

General Safety Rules

READ AND UNDERSTAND ALL INSTRUCTIONS
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Electrical Safety
WARNING!
Work Area
Page 2
E194601
REV 02/05