Maintenance - Chicago Electric 61737 Owner's Manual & Safety Instructions

Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
Make sure that the Switch is in the off-position and unplug the tool from its
electrical outlet before performing any procedure in this section.
tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BEFOrE EacH uSE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• damaged cord/electrical wiring,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
Sharpening Blades
When sharpening the Blades, maintain
original angles. (See Figure E.)
Item 61737 For technical questions, please call 1-888-866-5797.
2. aFtEr uSE, wipe external surfaces
of the tool with clean cloth.
upper Blade
upper Blade
12°
8°
Figure E
Lower Blade
4°
Page 11