Procedure For Tilting Down - Yamaha F115D Owner's Manual

Operation
UP
UP
4. Push the tilt support knob into the clamp
bracket or pull the tilt support lever to-
ward you to support the engine.
EWM00260
WARNING
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit loses pres-
39
sure.
5. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch "
trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ZMU04602
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
ZMU04232
EMU28052

Procedure for tilting down

Power trim and tilt models / power tilt models
1. Push the power tilt / power trim and tilt
switch "
is supported by the tilt rod and the tilt
support lever / tilt support knob becomes
free.
2. Release the tilt support lever or pull out
ZMU03449
the tilt support knob.
" (down) to retract the
" (up) until the outboard motor
ZMU03452