Table of Contents
Advertisement
EMU42702
Procedure for tilting down
1.
Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2.
Release the tilt support lever.
1
1. Tilt support lever
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
DN
ZMU07770
ZMU05840
DN
ZMU07999
"
DN
1. Power trim and tilt switch
EMU28063
Shallow water
EMU40702
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM02361
NOTICE
"
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
1. Cooling water inlet
EMU35237
Procedure for power trim and tilt models
1.
Place the control lever in neutral.
Operation
1
ZMU07771
1
ZMU07772
69
Advertisement
Table of Contents
