Fuel Management Meter; Fuel Flow Meter - Yamaha F115D Owner's Manual

Basic components
vice has activated. For charging the bat-
tery, consult your Yamaha dealer.
1. Low battery indicator
EMU26740

Fuel management meter

The fuel management meter shows the state
of the fuel consumption while the engine is
running.
1
3
1. Fuel flow meter
2. Fuel consumption meter / Fuel economy
meter / Twin engine speed synchronizer
3. Water separator warning indicator (operates
only if the sensor has been installed)
NOTE:
After the main switch is first turned on, all
segments of the display come on as a test.
After a few seconds, the gauge will change
to normal operation. Watch the gauge when
turning on the main switch to make sure all
23
segments come on.
EMU26750

Fuel flow meter

The fuel flow meter displays the amount of
fuel flow over a one hour period, at the cur-
rent rate of engine operation.
If twin engines are installed on your boat, the
fuel flow meter displays the total fuel flow of
both the port and starboard engines. It also
displays "
Use the "
flow display in the following order:
Press the "
G
the fuel flow of the starboard engine. An
" " (for starboard) will also be displayed.
Press the "
2 G
to display the fuel flow of the port engine.
A " " (for port) will also be displayed.
ZMU01748
Press the "
G
return the display to the total fuel flow of
both engines. "
will also be displayed to indicate both the
port and starboard engines.
NOTE:
The fuel flow meter displays gallons/hour
G
or liters/hour according to operator prefer-
ence. Select the desired unit of measure-
ment by setting the selector switch on the
back of the gauge during installation.
" (for port and starboard).
" (set) button to rotate the fuel
" (set) button once to display
" (set) button a second time
" (set) button a third time to
" (for port and starboard)
ZMU01749