Table of Contents
Advertisement
display will begin blinking. Press the "
(mode) button until the desired minute is dis-
played. Press the "
start the clock.
NOTE:
The clock operates on battery power. Dis-
connecting the battery will stop the clock.
Reset the clock after connecting the battery.
EMU26710
Fuel gauge
The fuel level is indicated by eight segments.
When all segments are showing, the fuel
tank is full.
ECM00860
CAUTION:
The Yamaha fuel tank sensor differs from
conventional sensors. Incorrectly setting
the selector switch on the gauge will give
false readings. Consult your Yamaha
dealer on how to correctly set the selec-
tor switch.
NOTE:
The fuel level reading can be affected by the
position of the sensor in the fuel tank and the
attitude of the boat in the water. Operation
with bow-up trim or continuous turning can
give false readings.
" (set) button again to
Basic components
"
EMU26720
Fuel warning indicator
If the fuel level decreases to one segment,
the fuel level warning segment will begin to
blink.
ECM00880
CAUTION:
Do not continue to operate the engine
with full throttle if a warning device has
activated. Get back to the port within troll-
ing engine speed.
1. Fuel level warning segment
EMU26730
Low battery voltage warning
indicator
If battery voltage drops, the display will auto-
matically turn on and begin to blink.
ECM00870
CAUTION:
Get back to the port soon if a warning de-
ZMU01745
22
Advertisement
Table of Contents
