Set up an internet access point
for packet data (GPRS)
1. Select
Menu
>
Access
points.
2. Select
Options
access point, or select an existing access point from the
list and then
Options
the access point as a basis for the new one.
3. Define the following settings.
Connection name
•
the connection.
Data bearer
•
Access point name
•
point. The name is usually provided by your service
provider.
User name
•
the service provider. User names are often case-
sensitive and provided by your service provider.
Prompt password
•
password each time you log into a server or
save the password in your device memory and
automate the login.
Password
— Enter your password if required by the
•
service provider. The password is often case-
sensitive and provided by the service provider.
Authentication
•
password always encrypted, or
your password encrypted when possible.
Homepage
•
you want to display as the home page when you use
this access point.
96
Tools
Settings
Connection
>
>
New access point
to create a new
>
Duplicate access point
>
— Enter a descriptive name for
— Select
Packet
data.
— Enter the name for the access
— Enter your user name if required by
— Select
Yes
to enter your
— Select
Secure
to send your
Normal
— Enter the web address of the page
4. After defining the settings, select
Advanced settings
Back
to save the settings and exit.
>
Advanced internet access
point settings for packet data
(GPRS)
to use
Select
Menu
Access
points.
After setting up a basic internet access point for packet
data (GPRS), select
define the following advanced settings:
Network type
•
protocol type. The internet protocol defines how data
is transferred to and from your device.
Phone IP address
•
device. Select
the device IP address. This setting is shown only if you
select
Network type
No
to
DNS address
•
Secondary DNS address
if required by your service provider. Otherwise, the
name server addresses are provided automatically.
Proxy server address
•
server. Proxy servers are intermediate servers used by
some service providers between a browsing service and
to send
its users. These servers may provide additional security
and speed up access to the service.
Options
to define the advanced settings or
Tools
Settings
Connection
>
>
>
Options
Advanced
>
— Select
IPv4
or
IPv6
— Enter the IP address of your
Automatic
to have the network provide
> IPv4.
— Select
Primary DNS address
and enter their IP addresses,
— Enter the address of the proxy
>
>
settings, and
as the internet
and