Back Up Data; Remote Configuration - Nokia E51 User Manual

You may not be able to change these codes for all security
modules.
The key store contains the contents of the security module.
To delete the key store, select
key store, and Options
delete the key store of all security modules.

Back up data

It is recommended to back up device memory regularly to
the memory card or a compatible computer.
To back up information from the device memory to a
memory card, select
Options Back up phone
>
To restore information from the memory card to the
device memory, select
Options Restore from
>
You can also connect your device to a compatible
computer and use Nokia PC Suite to back up data.

Remote configuration

Select Menu Tools
>
With Device manager, you can manage settings, data, and
software on your device remotely.
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your service
providers or company information management
102
department. Configuration settings may include
Key store, select the desired
> Delete. You may not be able to
Menu Tools Memory
> >
memory.
Menu Tools Memory
> >
card.
Device mgr..
>
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started by
the server when the device settings need to be updated.
To create a new server profile, select
server profile.
You may receive these settings from your service provider
in a configuration message. If not, define the following:
Server name
•
server.
Server ID — Enter the unique ID to identify the
•
configuration server.
>
Server password
•
device to the server.
Session mode
•
Access point
> •
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection.
Host address
•
configuration server.
Port — Enter the port number of the server.
•
User name
•
server.
Password
•
configuration server.
Allow configuration
•
to initiate a configuration session.
Auto-accept all requests
•
want the server to ask for your confirmation when it
initiates a configuration session.
Options
— Enter a name for the configuration
— Enter a password to identify your
— Select the preferred connection type.
— Select the access point to use for the
— Enter the web address of the
— Enter your user ID for the configuration
— Enter your password for the
— Select Yes to allow the server
— Select
New
>
Yes if you do not