Internet Access Points; Set Up An Internet Access Point For Packet Data (Gprs) - Nokia 002C9N1 User Manual

Use the wizard in the active standby mode
In the active standby mode, the WLAN wizard shows the
status of your WLAN connections and network searches. To
view the available options, scroll to the row showing the
status, and press the scroll key. Depending on the status, you
can start the Web browser using a WLAN connection,
disconnect from a WLAN, search for WLANs, or set the
network scanning on or off.
If WLAN scanning is off and you are not connected to any
WLAN, WLAN scanning off
mode. To set scanning on and search for available WLANs,
scroll to the row showing the status, and press the scroll key.
To start a search for available
WLANs, scroll to the row showing
the status, press the scroll key, and
select Search for WLAN. To set
WLAN scanning off, scroll to the
row showing the status, press the
scroll key, and select Switch WLAN
scan off.
When Start Web browsing
selected, the WLAN wizard
automatically creates an access
point for the selected WLAN. The
access point can also be used with
other applications requiring WLAN
connection.
If you select a secured WLAN, you are asked to enter the
relevant passcodes. To connect to a hidden network, you
must enter the correct service set identifier (SSID).
98
is displayed in the active standby
is

Internet access points

An internet access point is a collection of settings, which
define how the device creates a data connection to the
network. To use e-mail and multimedia services or to browse
web pages, you must first define access points for these
services.
Some or all access points may be preset for your device by
your service provider, and you may not be able to create, edit,
or remove them.
Set up an internet access point
for packet data (GPRS)
1. Select Menu Tools
>
Access points.
2. Select Options New access point
>
access point, or select an existing access point from the
list and then Options
the access point as a basis for the new one.
3. Define the following settings.
Connection name
•
connection.
Data bearer — Select
•
Access point name
•
point. The name is usually provided by your service
provider.
User name — Enter your user name if required by the
•
service provider. User names are often case-sensitive
and provided by your service provider.
Settings Connection
> >
to create a new
Duplicate access point
>
— Enter a descriptive name for the
Packet data.
— Enter the name for the access
© 2007 Nokia. All rights reserved.
>
to use