Connection Manager; View And End Active Connections; Search For Wlan - Nokia E51 User Manual

Together with a compatible computer, you can use your
device as a modem to connect to the web, for example.
Before you can use your device as a modem
• You need an appropriate data communications
software on your computer, such as Nokia PC Suite. For
more information, see the Nokia PC Suite guide.
• You must subscribe to the appropriate network services
from your service provider or internet service provider.
• You must have the appropriate drivers installed on your
computer. You must install drivers for the cable
connection, and you may need to install or update
Bluetooth or infrared drivers.
To connect the device to a compatible computer using
infrared, press the scroll key. Make sure the infrared ports
of the device and computer are directly facing each other
with no obstacles between them.
To connect your device to a computer using Bluetooth
wireless technology, initiate the connection from the
computer. To activate Bluetooth in your device, select
Menu Connectivity
>
Bluetooth > On.
If you use a cable to connect your device to a computer,
initiate the connection from the computer.
You may not be able to use some of the other
communication features when the device is used as a
modem.

Connection manager

Select Menu Connectivity
98
>
Bluetooth and select
>
Conn. mgr..
>
View and end active
connections
To see the open data connections, select
connections.
To view detailed information about network connections,
select a connection from the list and
The type of information shown depends on the connection
type.
To end the selected network connection, select
Disconnect.
To end all active network connections simultaneously,
select Options Disconnect
>

Search for WLAN

To search for WLANs available within range, select
Available WLAN networks. The available WLANs are
listed with their network mode (infrastructure or ad-hoc),
signal strength, and network encryption indicators, and
whether your device has an active connection with the
network.
To view the details of a network, scroll to it, and press the
scroll key.
To create an internet access point for a network, select
Options Define access
>
Active data
Options > Details.
Options
all.
point.
>