Sound Adjustments; Adjusting The Sound - JVC KS-F500 Instructions Manual

SOUND ADJUSTMENTS

Adjusting the sound

You can adjust the sound characteristics to your preference.
1
Indication
BAS
(Bass)
TRE
(Treble)
FAD
(Fader)*
BAL
(Balance)
VOL
(Volume)
Note:
* If you are using a two-speaker system, set the fader level to "00".
2
To turn on/off the loudness function
The human ear is less sensitive to low and high frequencies at low volumes.
The loudness function can boost these frequencies to produce well-balanced sound at low
volume level. Each time you press LOUD, the loudness function turns on and off alternately.
12
2
1
LOUD
Select the item you want to adjust.
To do:
Adjust the bass
Adjust the treble
Adjust the front and rear speaker
balance
Adjust the left and right speaker
balance
Adjust the volume
Adjust the level.
Note:
Normally the control dial works as the volume control. So you do not
have to select "VOL" to adjust the volume level.
Range
–06 (min.) —
–06 (min.) —
R06 (rear only) — F06 (front only)
L06 (left only) — R06 (right only)
00 (min.) —
+06 (max.)
+06 (max.)
50 (max.)