Scanning Broadcast Stations; Tape Operations; Listening To A Tape - JVC KS-F500 Instructions Manual

Scanning broadcast stations

When you press SCAN while listening to the radio, station scanning starts. Each time a
broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number
flashes on the display), and you can check what program is now being broadcasted.
If you want to listen to that program, press the same button again to stop scanning.

Listening to a tape

1
M u
M u lt i
s ic
S c
a n
Note on One-Touch Operation:
When a cassette is already in the cassette compartment, pressing TAPE 2 3 turns on the
unit and starts tape play automatically.
2
TAPE
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically ejects from the cassette compartment.
If you change the source to FM or AM, the tape play also stops (without ejecting the cassette
this time).
• You can also eject the tape with the unit turned off.
8

TAPE OPERATIONS

1
Insert a cassette.
The unit turns on and tape play starts automatically.
When one side of the tape reaches its end during play, the
other side of the tape automatically starts playing. (Auto
Reverse)
Select the tape direction.
Each time you press the button, the tape direction changes
alternately – forward (
2
) and reverse ( ).