Table of Contents
Advertisement
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialling in all
circumstances.
When you use voice dialling, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1
To start voice dialling, press and hold the
selection key. If you are using a compatible headset
with the headset key, press and hold the headset key to
start voice dialling.
2
A short tone is played, and
clearly the name or nickname that is saved on the
contact card.
3
The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout of
1.5 seconds, the device dials the number.
If the recognised contact was not correct, select
to view a list of other matches, or
dialling.
right
Speak now
is displayed. Say
Next
Quit
to cancel voice
Copyright © 2006 Nokia. All rights reserved.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile,
Mobile
Telephone,
Tel.
(home), and
Answer or reject a call
To answer the call, press
To mute the ringing tone when a call comes in, select
Silence.
Tip! You can also use the
control to answer and end a call.
If you do not want to answer a call, press
If you have activated the
Call divert
divert calls, rejecting an incoming call also diverts the call.
See
"Call
diverting", p. 104.
When you reject an incoming call, you can also select
text message
to send a message to the caller informing
why you cannot answer the call. You can edit the text
before sending it. To set up this option and write a
standard text message, see
(home),
Mobile
(business),
Tel.
(business).
or open the slide cover.
key on the remote
to reject it.
>
If busy
function to
Send
"Call
settings", p. 97.
27
Advertisement
Table of Contents
