Nokia N91-6 User Manual page 61

Exposure modes
• To set the camera to take six pictures in a sequence,
select Options > Sequence mode
sequence mode with the Self-timer. See
picture—Self-timer", p. 49. The pictures are
automatically saved in Gallery.
After you take the pictures, they are shown in a grid on
the main display. To view a picture, press the joystick to
open it.
• To set the camera to take pictures in low light
conditions, select Options
You in the picture—Self-timer
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self-timer
30 seconds. To activate the self-timer, select Activate. The
self-timer indicator ( ) blinks and the device beeps when
the timer is running. The camera takes the picture after the
selected delay elapses. You can also use the
the sequence mode. See "Exposure
Adjust colour
To enable the camera to reproduce colours more
accurately, or to add effects to your pictures or videos,
select Options > Adjust, and select from the following
options:
. You can also use the
"You in the
> Night mode.
> 10 seconds, 20 seconds, or
Self-timer
modes", p. 49.
Copyright © 2006 Nokia. All rights reserved.
White balance—Select the current lighting condition from
the list. This allows the camera to reproduce colours more
accurately.
Colour tone—Select a colour effect from the list.
The screen display changes to match any settings made,
showing you how the change affects the pictures or videos.
The settings return to the default settings when you close
the camera.
Adjust still image camera settings
To change the main settings, select
These settings remain the same until you change them.
Select from the following options:
Image quality—High, Normal, or Basic. The better the
image quality, the more memory the image consumes.
Image resolution—Select the resolution you want to use.
The higher the image resolution, the more memory the
image consumes. The quality of a zoomed picture is lower
in
than that of a nonzoomed picture.
Default image name—Set a name for the pictures taken.
For example, if you set Beach as the default name, Camera
will name the pictures you take Beach, Beach(001),
Beach(002), and so on, until you change the setting again.
Options > Settings.
49