Nokia N91-6 User Manual page 111

Table of Contents

Advertisement

Check the type of access point you need with your service
provider for the service you wish to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Packet data connections in GSM networks
When you use your device in a GSM network, multiple data
connections can be active at the same time and access
points can share a data connection. To check the active
data connections, see
"Connection
The following indicators may be displayed below the signal
indicator, depending on which network you use:
GSM network, packet data is available in the network.
GSM network, packet data connection is active, data is
being transferred.
GSM network, multiple packet data connections
are active.
GSM network, packet data connection is on hold.
(This can happen during a voice call, for example.)
Access points
Some or all access points may be preset for your device
by your service provider or network operator, and you may
not be able to change, create, edit, or remove them.
indicates a protected access point. You may also receive
manager", p. 91.
Copyright © 2006 Nokia. All rights reserved.
access point settings in a text message from a service
provider. See
"Data and
settings", p. 39.
Tip! See also
"Receive MMS and e-mail
p. 37, "E-mail", p. 45, and
p. 79.
To create a new access point, press
Settings
>
Connection
>
Access points
access
point.
Follow the instructions given to you by your service
provider.
Connection
name—Give a descriptive name for the
connection.
Data
bearer—Depending on what data connection you
select, only certain setting fields are available. Fill in all
fields marked with
Must be defined
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
settings",
"Access point for
Services",
, and select
Tools
>
>
Options
>
New
or with a red asterisk.
99

Advertisement

Table of Contents
loading

Table of Contents