Table of Contents
Advertisement
Orig. phone
settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See "Security",
"Phone and
the device may take a longer time to power on. Documents
and files are not affected.
Standby mode
Active
standby—Use shortcuts to applications in the
standby mode on the display. See
p. 24.
Left selection
key—To assign a shortcut to the left
selection key (
) in the standby mode, select an
application from the list.
Right selection
key—To assign a shortcut to the right
selection key (
) in the standby mode, select an
application from the list.
Active standby
apps.—To select the application shortcuts
you want to appear in the active standby mode, select the
applications from the list. This setting is only available if
Active standby
is on.
You can also assign shortcuts to different movements of
the joystick. Select the application for each movement
from a list. The joystick shortcuts are only available if
Active standby
is off.
SIM", p. 102. After resetting,
"Active standby
mode",
Copyright © 2006 Nokia. All rights reserved.
Operator
logo—This setting is visible only if you have
received and saved an operator logo. You can choose
whether you want the operator logo to show or not.
Display
Brightness—You can change the brightness of the display
to be lighter or darker.
Power saver
time-out—The power saver is activated when
the time-out period is over.
Light
time-out—Select a time-out after which the
backlight of the display is switched off.
Call settings
Send my caller ID
(network service)—You can set your
phone number to be displayed to (Yes) or hidden from (No)
the person to whom you are calling, or the value may be
set by your network operator or service provider when you
make a subscription
(Set by
Call waiting
(network service)—If you have activated call
waiting, the network notifies you of a new incoming call
while you have a call in progress. Select
request the network to activate call waiting,
request the network to deactivate call waiting, or
status
to check if the function is active or not.
network).
Activate
to
Cancel
to
Check
97
Advertisement
Table of Contents
