Functional Description - Makita GA7030 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
1. Shaft lock
1
2
3
1. Motor housing
2. Lock button
3. Handle
1
B
A
2
1. Switch trigger
2. Lock lever
6
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Shaft lock
006733
CAUTION:
• Never actuate the shaft lock when the spindle is moving. The tool may be
damaged.
Press the shaft lock to prevent spindle rotation when installing or removing
accessories.
Switch handle mounting positions
007349
The switch handle can be rotated to either 90° left or right to fit your work
needs. First, unplug the tool. Press the lock button and rotate the switch han-
dle to left or right fully. The switch handle will be locked in that position.
CAUTION:
• Always make sure that the switch handle is locked in the desired position
before operation.
Switch action
006734
CAUTION:
• Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
For tool with the lock-on switch
To start the tool, simply pull the switch trigger (in the B direction). Release the
switch trigger to stop. For continuous operation, pull the switch trigger (in the B
direction) and then push in the lock lever (in the A direction). To stop the tool
from the locked position, pull the switch trigger fully (in the B direction), then
release it.
For tool with the lock-off switch
To prevent the switch trigger from accidentally pulled, a lock lever is provided.
To start the tool, push in the lock lever (in the A direction) and then pull the
switch trigger (in the B direction). Release the switch trigger to stop.
For tool with the lock on and lock-off switch
To prevent the switch trigger from accidentally pulled, a lock lever is provided.
To start the tool, push in the lock lever (in the A direction) and then pull the
switch trigger (in the B direction). Release the switch trigger to stop.
For continuous operation, push in the lock lever (in the A direction), pull the
switch trigger (in the B direction) and then push the lock lever (in the A direc-
tion) further in.
To stop the tool from the locked position, pull the switch trigger fully (in the B
direction), then release it.