Table of Contents
Advertisement
For example, press
briefly to insert the wait character into your dialing string. Available dialing
codes are as follows:
Dialing codes
*
Bypasses a set of instructions
+
Precedes an international telephone number
p
Pauses for 2.5 seconds before sending any numbers that follow
w
Wait. Your phone waits for you to press
numbers or codes that follow.
Set up voicemail with dialing codes
1 At the Start screen, press Names, scroll to 1-touch dialing, and
press Select.
2 Scroll to an empty 1-touch dialing slot and press Assign.
3 Enter your voice mailbox number, including the area code.
4 Refer to the table entitled "dialing codes," and enter any codes as
necessary using the information that you wrote down earlier.
For example, if you pause for 5 seconds after connecting to voicemail,
enter p twice after the voice mailbox number, such as 2145551212pp.
5 Enter any remaining pauses, PIN codes, and other information that
allows you to listen to your messages, then press OK.
6 Enter a name (such as Voicemail) and press OK. A message appears in
the display confirming your 1-touch dialing location has been saved.
Now, to dial and listen to your voicemail, just press and hold the
assigned 1-touch dialing key at the Start screen. No other keypresses
should be necessary.
four times to display "w" (wait character). Pause
[ 46 ]
before it sends any
Advertisement
Table of Contents
