Table of Contents
Advertisement
Receive a TTY call
1 Make sure the TTY and phone are connected.
2 When the phone vibrates (if vibrate is on), press
call, and then type your response on the TTY.
3 To hang up, press
• OPTIONAL HEADSETS
The HDC-9P and HDE-1 headsets can be purchased separately as accessories.
Connect the headset
1 Plug the headset jack into the accessory
connection on the bottom end of your phone.
2 Place the round headset ear plug in your ear.
With the headset connected, you can make,
answer, and end calls as usual.
•
Use the keypad to enter numbers
•
Press
•
Press
When in use, the headset microphone hangs at
the side of your head. Although it may seem far
from your mouth, you can speak at normal volume.
VOICE DIAL A NUMBER WITH THE HDC-9P HEADSET
Once you have voice tagged entries in your Phone book, you can make a
call with the HDC-9P headset by simply pressing and holding the remote
button on the microphone. See "Assign a voice tag" on page 53 for
information on setting up voice tags if you have not already.
1 At the Start screen, press and hold the remote button on the headset.
Your phone beeps and Please speak now appears in the display.
2 Within 3 seconds, pronounce the voice tag into the microphone.
Once the voice tag is recognized, the tagged entry appears in the
display, replays through the earpiece, and the number is dialed.
on the phone.
to place a call
to end a call
[ 66 ]
to answer the
Advertisement
Table of Contents
