Table of Contents
Advertisement
USER MANUAL
ENGLISH
–
Do not remove or modify the plates affixed on the
machine.
–
In case of machine malfunctions ensure that these
are not caused by a lack of maintenance. Otherwise,
request assistance from the authorised personnel or
from an authorised Service Center.
–
In case of part replacement, order ORIGINAL spare
parts from an authorised Dealer or Retailer.
–
To ensure the proper and safe operation of the
machine, have the scheduled maintenance, detailed
in the related chapter of this Manual, performed by
the authorised personnel or an authorised Service
Center.
–
The machine must be disposed of properly, because
of the presence of toxic-harmful materials (oils,
plastic materials, etc.), which are subject to standards
that require disposal in special centers (see chapter
"Scrapping").
–
If the machine is used according to the instructions,
the vibrations do not cause dangerous situations. (3.3
m/s2 EN 1033-1995-08).
–
During the petrol engine operation, its silencer warms
up; do not touch the silencer when it's hot to avoid
burns or fire.
–
Running the engine with an insufficient quantity of
petrol can seriously damage the engine. Check the oil
level when the engine is off and the machine is on an
even surface.
–
Never run the petrol engine without air filter, as the
engine could be damaged.
–
Technical service operations on petrol engine must
be performed by an authorised Dealer.
Use only original spare parts or equivalent for the petrol
engine. Using spare parts of lower quality can seriously
damage the engine.
UNPACKING
When the machine is delivered, check that the cardboard
packing and the machine were not damaged during
transportation. If the damage is evident, keep the packing
and have it checked by the Parcel Service that delivered
it. Call the Carrier immediately to fill in a damage claim.
Please check that the following items have been supplied
with the machine:
–
Sweeper manual
–
Petrol engine manual
–
Spare Parts List
4
FLOORTEC 560 P
MACHINE DESCRIPTION
OPERATION CAPABILITIES
This sweeper has been designed and built to be used by
a qualified operator to clean (by sweeping and vacuuming)
smooth and solid floors in civil and industrial environments
and to collect dust and light debris under safe operation
conditions.
CONVENTIONS
Forward, backward, front, rear, left or right are intended
with reference to the operator's position, that is to say on
the driver's seat with the hands on the handlebar (1, Fig.
C).
Control panel
(See Fig. B)
1.
Control panel
2.
On/off key switch
3.
Panel fastening screws
Exterior general overview
(See Fig. C)
1.
Handlebar
2.
Handlebar inclination adjusting knobs
3.
Selector lever
4.
Can holder
5.
Hood
6.
Rear wheels on fixed axle
7.
Pivoting front wheel
8.
Side broom
9.
Main broom (inside)
10. Side broom lifting and adjusting knob
11. Side broom retainer
12. Left side skirt
13. Right side skirt
14. Front skirt
15. Rear skirt
16. Hopper
17. Hopper hook
18. Hopper hook handle
19. Manual filter-shaker handle
20. Main broom movable door
21. Main broom height left adjuster
22. Main broom height right adjuster
23. Main broom right door
24. Main broom right door fastening screws
25. Pedal brake on front wheel (optional)
26. Fuel tank cap
27. Engine pull-starter cord handle
28. Engine exhaust pipe
29. Petrol tap and engine starter compartment
30. Petrol engine ventilating grid
31. Front skirt lifting lever
146 2592 000(1)2005-03 A
Advertisement
Table of Contents
