Playing Back Motion Pictures By Date; Resuming The Previous Playback - Panasonic VDR-D220EB Operating Instructions Manual

LSQT1157_EB.book 63 ページ ２００６年１２月１１日 月曜日 午後８時４６分

Playing back motion pictures by date

Recorded scenes are grouped by date on this unit.
Scenes recorded on the same day can be played back in succession.
1
Press the MENU button, then select
[PLAY SETUP] # [PLAY MODE] #
[BY DATE] and press the joystick.
≥ When [PLAY MODE] is set to [VIEW ALL], all
recorded motion pictures will be played back in
succession.
2
Select the date for playback, then press the
joystick.
The scenes recorded on the same day are displayed as thumbnails.
3
Select the scene to be played back.
≥ Even if scenes are recorded on the same day, they are grouped separately in the following cases.
jWhen the number of scenes exceeds 99 (RAM) (-RW‹VR›) (-RW‹V›) (-R)
jWhen the disc is removed (-RW‹V›) (-R)
jWhen the [REC ASPECT] setting is changed (-RW‹V›) (-R)
jWhen the disc is repaired (-RW‹V›) (-R)
jWhen the layers switch on a DVD-R DL (-R)

Resuming the previous playback

Press the MENU button, then select
[PLAY SETUP] # [RESUME PLAY] #
[ON] and press the joystick.
If playback of a motion picture is stopped, [R]
appears on the thumbnail view of the stopped
scene.
≥ If playback is stopped at any point during a motion
picture while [RESUME PLAY] is set to [OFF], the
next time the motion picture is played back, it will
be from the beginning.
≥ The resume position memorized is cleared if you open the disc cover or operate the mode dial, etc.
(The [RESUME PLAY] setting is kept.)
Playback
MENU
MENU
63
LSQT1157